Modules

Languages:

[[::Modules|English]]  • [[::Modules/it|italiano]]  • [[::Modules/pt|português]]

Overview

Modules are most commonly interfaced with by messaging a special user on irc. For example, to view the highlight keywords in your watch list, you'd send /msg *watch list. When znc sees that the nick you're msging starts with an asterisk, it doesn't forward the message to the ircd but instead sends it to the proper module for processing. In this case, the watch module will get the message and reply to you with a listing of your keywords. This makes for a very convenient and standard way of configuring or otherwise communicating with your loaded modules as well as a common and standard way for your loaded modules to display status or other information back to you. Notice that we said "loaded modules" which brings up the point that you first have to /znc loadmod watch before you can interface with the watch module. Most modules will reply to /msg *module help with a listing of commands.

ZNC modules are loaded either globally or on a per-user basis. Each module itself defines whether it is global or user specific. User level modules can do things ranging from manipulating the incoming/outgoing messages to implementing a full blown twitter client. They can also do more traditional irc tasks such as challenge based auto-op, setting you away, or logging to disk. Each user gets to load and configure their own set of modules to customize their experience to suit their preference.

Global modules are loadable by admins and provide functionality or change behavior for all users. For example, the partyline module has to be global since it provides functionality for all users on a given znc instance to be able to communicate with each other from within znc itself. Global modules can do everything that user level modules can do as well as a few extras. They can replace ZNC's authentication system, modify the config writing process, deal with CAP, etc.

Both global and user level modules can also hook into znc's web interface and provide web content. The most common web module is webadmin which allows admins to add/remove users and allows users to configure their settings from a browser. The web hooks are a fairly new feature available to znc module authors, so stay tuned for some amazing features to come.

Developers

ZNC modules are written in C++ natively. There are also a couple of modules that embed an interpreter to allow you to load perl, python or tcl modules. To learn more about creation of modules you should read Perl Modules, Python Modules or C++ Modules. Feel free to create wikipages about modules you created, but don't forget to add a download link, contact information and use the same layout as the rest of the modules. Contributions are always much appreciated.

Module List

Global Modules

adminlog

Log user connects and disconnects and failed logins to file or syslog.

blockuser

Blocks certain users from using ZNC saying their account was disabled.

certauth

This module let's users to log in via SSL client keys.

connect_throttle

Limit the number of login attempts a user can make per time

fail2ban

Block IPs for some time after a failed login.

imapauth

Allow users to authenticate via IMAP.

lastseen

Logs when a user last logged in to ZNC.

modperl

Loads perl scripts as ZNC modules.

modpython

Modpython allows you to use modules written on python 3.

modtcl

Allows you to run tcl scripts in ZNC, including some eggdrop.

partyline

Allows ZNC users to join internal channels and query other ZNC users on the same ZNC.

saslauth

Allow users to authenticate via SASL.

webadmin

Allows you to add/remove/edit users and settings on the fly via a web browser.

notify_connect

Sends a notice to all admins when a user logs in or out.

User Modules

admin

Allows you to add/remove/edit users and settings on the fly via IRC messages.

autoattach

Autoattach watches your detached channels and reattaches you automatically when there is activity in a channel you added to your autoattach list. Read the page about detaching to learn about detached channels.

autocycle

Cycles a channel when you are the only one in there and you don't have op.

autoop

Auto op the good guys.

autoreply

Gives a automatic reply if someone messages you if you are away.

autovoice

Autovoices everyone who joins some channel.

awaynick

Change your nick while you are away.

awaystore

When you are set away or detached, this module will save all private messages for you. The messages can be read until you delete them. Messages are stored in an encrypted file on your shell (based on the <password> you set, if set). That way everyone who has access to this shell still cannot read your messages. This module will also set you away when you are idle some time (see timer/settimer).

block_motd

This module blocks the server's Message of the Day.

bouncedcc

The bouncedcc module bounces dcc transfers through the znc server instead of sending them directly to the user.

buffextras

Add nick changes, joins, parts, topic changes etc. to your playback buffer.

cert

This module lets users use their own SSL certificate to connect to a server

chansaver

Keeping config up to date when user joins and parts.

charset

Normalizes (i.e. converts) character encodings.

clearbufferonmsg

This module attempts to bridge the gap between being inundated with old buffer if you have KeepBuffer=true; and possibly missing messages when you ping out, if you have KeepBuffer=false.

clientnotify

Notify about new incoming connections to your user.

controlpanel

This module allows you to add/remove/edit users and settings on the fly via IRC messages.

crypt

Encryption for channel/private messages.

ctcpflood

This module tries to block ctcp floods.

cyrusauth

This module is intended for admins who run a shell/web/email/etc server and want to provide ZNC access to their existing users.

dcc

This module allows you to transfer files to and from ZNC

disconkick

This module will kick your client from all channels where you are, in case if ZNC disconnects from server.

flooddetach

This module detaches you from channels which are flooded.

identfile

The identfile module places the ident of a user to a file when they are trying to connect.

keepnick

Tries to get you your primary nick.

kickrejoin

Implements auto-rejoin-on-kick.

listsockets

This module displays a list of all open sockets in ZNC.

log

Log conversations to file.

missingmotd

This user module will send 422 to clients when they login.

nickserv

Auths you with NickServ.

perform

Performs commands on connect.

q

Auths you with Q (and a little more).

raw

View all of the raw traffic.

route_replies

Routes back answers to the right client when connected with multiple clients.

sample

This is an example for writing modules to do whatever you want.

savebuff

Saves your channel buffers into an encrypted file so they can survive restarts and reboots.

schat

SSL (encrypted) DCC chats.

send_raw

Allows you to send raw traffic to IRC from other users.

shell

Have your unix shell in a query window right inside of your IRC client.

simple_away

Automatically set you away on IRC when disconnected from the bouncer.

stickychan

Keeps you sticked to specific channels.

watch

Monitor activity for specific text patterns from specific users and have the text sent to a special query window.

More Modules

For more modules, see Category:Modules.

Managing Modules

Modules can be added or removed easily. Modules can be stored in ~/.znc/modules and /usr/local/lib/znc by default. ZNC installs its modules to that second directory, which in fact is ${prefix}/lib/znc, but this can be changed with ./configure --module-prefix=DIR before compiling.

ZNC will first look in the local sub-directory modules when searching for modules. Only files that end with ".so" will be seen as a module. To remove modules you can simply delete them from the folder. No other configuration changes or restarts are necessary. To remove, but also keep a module for later use you can also change the name, like: mv sample.so sample.so_.

To compile a new module you must first save the source as a ".cpp" file. Compiling modules describes the process in detail.

(Un)Loading Modules

Both global and user modules can be (un)loaded from webadmin or via the *status query window, like:

/msg *status loadmod <module> <parameters>
/msg *status unloadmod <module>

• * is the StatusPrefix set in your configuration. Usually it's just an asterisk ("*").
• <module> is based on the modules file name excluding ".so".
• <parameters> are specific for each module and not required.

Alternatively, global modules can be loaded by adding them to your config file (znc.conf) right before the user definitions, like:

LoadModule = <module> <parameters>

<User foo>

If you want to load user modules by editing config, they have to be added within a specific user, like:

<User foo>
  ...
  LoadModule = <module> <parameters>
  ...
</User>

Please keep in mind, that a user is not able to load a module, if the directive "DenyLoadMod" is set to true. Trying to load a module will fail with "Unable to load [<module>] Access Denied.".

Using modules

It is recommended to read the module's wikipage if you want to find out how a module works. Alternatively the following command can be used to get a command list:

/msg *<module> help

• * is the StatusPrefix set in your config file.

External modules

droproot

Allows ZNC to drop root privileges on systems that implement POSIX setuid/setgid.

motdfile

Reads a MOTD from a file and displays it to users when they login.

notify

Notifies all ZNC users when a client attaches/detaches.

amsgfilter

Filters amsgs from specified channels.

antiidle

Hides your idle time.

autoattach

Reattaches you to channels on activity.

colloquy

Push private messages and highlights to your iPhone/iPod Touch via Colloquy Mobile.

email

Monitors email activity on local disk /var/mail/user.

fish

FiSH encryption for channel/private messages.

fixfreenode

This module blocks some freenode-specific feature which results in plus (+) and minus (-) signs being displayed in front of every message from a client.

fakeonline

Fakes online status of ZNC *-users, to fix some clients.

notifo

Send private messages and highlights to your mobile devices using Notifo. Includes a highly configurable set of conditions to control how and when notifications get sent.

twitter

Implements a Twitter client. It can post new tweets and monitor searches, users, timeline and @mentions.

See this page for a list of external modules Category:External Modules